Supplying All Natural Solutions for a Better Tomorrow

HomeOur CompanyProductsCatalogs / MSDSProject PhotosCareersContact Us

Industrial
Cleaners

 BioRem 2000
Acid Eater
Oil Vanisher Flush Guarde Bilge Cleaner Fuel Eliminator Halex Adhesive Rmvr Meth Lab Septic Buster Dust Control Oil X Pond Conditioner
Algae Eater

Janitorial
Food Service
Sanitizer & Cleaners

Beyond Green
FOG Elimination San-A-Safe
Grease Buster Grill Hood Oven
Drain Buster Bright Grout
Grease Trap
Odor Buster In
Odor Buster Out Carpet Stain
Graffiti Buster
Total Surface
Fresh Wash Mattress Cleaner

San-A-Safe Handout

San-A-Safe
Handout
  View/Download (736KB)


 

FEATURES AND BENEFITS
  • The “All-Natural” cleaner, deodorizer, sanitizer, virucide and fungicide.
  • Results in only 60 seconds of contact time.
  • Rapidly kills a broad spectrum of bacteria, fungi and viruses.
  • Strong residual effect – continues to work for days after application.
  • Not affected by the presence of organic material (soil).
  • Safe on all surfaces and equipment.
  • NSF-approved as a General Cleaner (A1) and as a Sanitizer (D1).
  • Bio-based, all-natural and biodegradable and EPA-registered 81857-1.

Item # (Pack) Size Dilution
9301-001 (12) 32 oz./946 ml. RTU
9301-002 (4) 1 gal./3.78 L 1:32

Until recently, hazardous cleaning agents were considered to be the answer to cleaning and sanitation problems. Unlike conventional sanitizers, San-A-Safe™ does not contain any hazardous chemicals. Additionally, San-A-Safe™ has a 60-second kill rate, unlike Quats and chlorine-based products which generally have a kill rate of approximately 10 minutes. San-A-Safe™ is not affected by organic material and does not require the two-step cleaning process most conventional sanitizers need. Most Quats and chlorine-based sanitizers require a pre-cleaning before use. San-A-Safe™ is a very effective cleaner and deodorizer, and the 60-second kill rate greatly reduces human error and provides a more practical cleaning product for a variety of applications, including food service areas, restrooms, locker rooms, etc.

San-A-Safe™ breaks down the biofilm of bacteria allowing the active ingredients to penetrate the cell wall of the pathogen thereby killing the cell. Most other sanitizers kill the cell by toxic poisoning which leaves residue on surfaces that must then be rinsed negating the ongoing efficacy of these products. San-A-Safe™ works hours after chlorine-based products lose their effectiveness. Unlike conventional sanitizers, bacteria cannot build up a resistance through mutation due to the unique method in which San-A-Safe™

San-A-Safe™ is easily applied with sprayers, mops, auto floor scrubbers as well as spray-and-wipe applications. Allow solution to dwell for 1 minute and then wipe, scrub or rinse to remove soil.  kills bacteria.

Efficacy Profile

Bacteria Kill Rate Bacteria Kill Rate Bacteria Kill Rate
MRSA NCIMB 50143 99.9% Norwalk virus 99.9% Listeria monocytogenes 99.9%
Stachybotrys chartarum 99.9% Avian Influenza virus 99.9% P. aeruginosa 99.9%
S. aureus 99.9% E. coli 0157 99.9%

Salmonella typhimurium

 99.9%
 
  

Customer Login Terms of Use                                                                                                                                               ©2011 DT Distribution LLC